- dense monochromatic cotton, satin - 2.5 meters and a width of 110 cm
- colored cloth into a fine figure of 2 m and a width of 90 cm
- elegant lace or braid 10 m
- sheet paperpatterns
- Measuring tape
Measure the width of the back and chest.On a sheet of paper patterns to wait their individual pattern based on these dimensions.From colored fabric cut on two parts A, B and C. It will be a flirt and strap your future sundress.From the remnants of colored fabric cut the ribbon width of 7 cm, they will go to finish sundress.
of a monochromatic fabric carve out two trapezoids.Their height is determined takinginto account the necessary length sundress.The length of the lower base - 110 cm, at the upper base of the trapezoidal rule to make different.The rear panel should be 5 cm larger than the width of the back, front - 8 cm.
Sew the side of the yoke, treat taped top portion.
In the center of the front cloth stitch finishing tape of colored fabric.Sew it together with the tape, which is routed along the seam.
Sew the side of the front and rear cloth.Hem treat the finishing tape of colored fabric with padded along the seam tape.Otgladte hem.The upper part of the panels prostrochite largest stitch and assemble "in kuliske" the width of the bottom of the yoke.
Sew the lower part of the flirt and sundress.Progladte and treat all the seams inside out.The straps fold in half, ostrochite them, paving the braid on the edge.Iron the strap and adjust their location and length, wearing a sundress.Stitched them to the yoke.
Tip 2: How to sew a Russian folk sundresses
Dress - traditional Russian women's clothing.In the tradition of each region had its own particular cut: color, form-fitting, fabric, ornaments, and other items.In addition, there were differences between the festive bright sundresses and light, but more modest everyday.But in any case sundress I was so clear, that the woman is not allowed to change clothes, even during pregnancy.
pattern pieces: four parts straps twice the length of the point of the breast to the shoulder width of 5 cm .;back length from the middle of the blade-to-toe, wide floor-Circumference above the breast;the front part in the shape of a trapezoid: upper width - half the girth of the chest, under the breasts to a volume expansion of the breast (from one sideline to the other on the chest), the length-to-toe.All items are subject Molds cut seam allowance.
Details straps fold pairs at each other, face inwards prostrochite each pair on three sides and remove.Fold the edges and prostrochite fourth side.
If you plan to decorate sundress embroidered on the chest or upper back, place the prepared fabric with embroidery on the edges of panels.Fold the side edges of the main panels, prostrochite (on the left side do not sew embroidery).Interconnected right side completely, but with the left side up to leave a space countersunk lightening.
Fold the top and bottom edges of the main panels, prostrochite.If there is a stitch, leave a distance between the lines symmetrical, in that hide the ends of the straps.
Sew straps seam "over the edge" or "zigzag".If there is a stitch ends of shoulder straps should be located between the base fabric and embroidery.Sew the zipper in the left side seam between the embroidery and the main cloth.
Decorate sundress buttons, beads, lace and ribbon.Wear it over a long white shirt.Step into this model will be very broad.
- Russian national sundress with their hands