- dense fabric, sewing accessories, furniture, finishing materials, tape-loop fastener (5 cm), grommets (4 pieces), bias binding (2 m), lace (30 cm), a small pieceNonwoven fabric.
To start collect all the necessary materials.It is advisable to choose a fairly thick cloth to backpack holding form.You can sew backpack , for example, from old jeans.
Vykroyte all the necessary parts: an oval piece for the bottom (20h12 cm), two rectangular pieces (30h25 cm) square pocket (15x15 cm), two straps (54h4 cm), the valve (20x10 cm), a piece for the handle (20X3 cm).Keep in mind that the size of these parts seam allowance is already included.
Treat a cut edge all the details on the overlock seam or "zigzag".
Sew all the details in the following order.Treat inlay edge of the pocket.Sew it on the front side of the rectangle.Then sew the seams on the sides of the main parts, handle inlay top cut.Also treat the bias binding edge of the valve.
Getting straps.Wrong side fold the top wide parts of the straps.Sew them, then turn out and iron.Similarly, do and handle.Glue the bottom of the interlining.By the upper edge of the rear part backpack and handle supply air valve and straps.By the lower edge of the same parts supply air straps, and then sew the bottom.Body backpack and ready.There were only minor changes.
struck the two eyelets on both sides.Sew the lace.On the front of the backpack and inside out and sew the valve with Velcro.So here's a way you can sew simple original backpack their hands , as well as to give a second life to your old jeans.
Tip 2: How to sew a bag baby backpack
allow to bring to normal or cycling essentials without taking up arms.Kid happy nakinet lyamochki backpack on the shoulders, which are adjustable in length.If you perform additional belt loops, the backpack can be mounted on a rack or handlebar.
- - Solid dense fabric;
- - lining fabric;
- - thin padding polyester;
- - fasteners - hooks;
- - textile sling;
- - adhesive tape;
- - fastener - zip.
cutting tissue from the top two main parts of a backpack, leaving allowances and a half centimeters.The main part is a rectangle with rounded corners in the upper part.On the front of the make or sew applique patch pocket, topstitch detail at the edge.
Calculate the length of the side of the backpack, which is equal to the perimeter of a rectangle lying at the base of the two already raskroennyh parts.Divide the resulting size in half.One half of the side of the bottom of the form, the second half (the upper side part) made up of two parts, between which is enclosing lightning.
At this backpack straps unfastened easily, so you need to make a small pocket to hold the straps.Sew it to the bottom of the details.From slings do loops, with which you can hang the bag on the handlebars of the bicycle.The edges of the pieces on fire oplavte to fiber is not dissolved.Sew the ends of the belt loops on the segment of the contact tape (Velcro).Belt loops stitched to the back part of a backpack.
Sew the front of the two parts forming the upper sidewalls backpack zipper.Then fold the fabric, and then baste it close to the edge.The rings are connected to the bottom of the top piece.To the rear of the backpack baste sling threaded into the frame, two on each side of the upper part and two - on the sides of the bottom.Between the upper parts sew handle.Sew together the details of a backpack, then turn out on the front side, and defer to the edge.
otrez prepared quilted synthetic padding lining fabric and sew from it an exact copy of the backpack.In the sewing zippers bend allowances on the wrong side and baste.Insert the lining into the bag and place gently connect the sewing zippers.Defer the seam to the edge of the front side.The ends of the straps to insert frames carbines and attach them to a backpack.