Tip 1: How to knit a column with an unfinished nakida

Incomplete columns with one, two or more nakida can significantly diversify the pattern.Very often they need to be connected to the beams for a beautiful group of columns.If the bars to finish unfinished parts of the product, then connect them with each other can be a decorative stitch "loop in the loop" as in knitting.
you need
  • - yarn of medium thickness;
  • - hook thickness of yarn;
  • - additional thread;
  • - 2 hooks, fishing line connected.
Guide
1
Tie pattern.For training make a chain of any number of stitches.Incomplete columns with nakida may be part circular motif, but first try to contact them directly canvas.Make 2 air loop on the rise.
2
nabroste thread on the hook as you would with a conventional knitting bars with nakida.Enter a hook in the right loop of the chain.Move the hook under the working thread, grab her and pull outward on the hook, you should have three hinges - the one you just pulled, nakida and one that was already on the hook.
3
recaptured working thr
ead and pull it through the loop and to draw from the air loop of the previous row or column and nakida.Knitting with conventional column nakida you would need to knit together the two loops are on the hook.Now you do not, leave both.Analogichnoprovyazhite next column with an unfinished nakida.
4
Columns two, three and more nakida tally almost exactly.Provyazyvayte first reception as well as regular columns, but do not end up on the hook and leave the 2 loops.When the next unfinished column should be formed three loops and so on.
5
in patterns that are in the middle parts such columns is rarely performed in combination with other elements.As a rule, they have to be there to connect with each other to obtain a beam.Tie the manner described some unfinished columns with one or more nakida.After the last vyvyazyvaniya grab hook working thread and pull it through the loops, except the last one, that is, one that has already been before the vyvyazyvaniem first column.You get 2 loops.Knit them together.
6
There may be other combinations of groups of columns with nakida.It is usually stated in the description of the drawing.For example, the knit of 5 bars.Then grab a thread and pull it through the first 3 column.Turn the work, knit chain of several stitches.Spend the hook through all unfinished pillars and pull them through the loop.Tie it with a final loop air chain.In general, the ability vyvyazyvayut different versions of columns allows any skilled workers to come up with new and new pictures.
7
This method may be appropriate at the end of the part.Knit these columns for the last number.End of the details in this case is roughly the same as when knitting.The most convenient way to do this hook on fishing line or two hooks, fishing line connected to one another in the manner of circular needles.You can remove the hinges and additional yarn and knitting small parts - on a pin.Tie the second part, after finishing her the same way.Connect the pieces to each other knit stitch "loop in the loop."Run it can be like a hook and needle.

Tip 2: How to Knit with two nakida

use in knitting nakida (meaning nakidyvanie on the needle or hook working thread unintended under normal loops) - a necessary skill that allows you to add the number of loops onthe product, as well as to perform certain patterns.
How to Knit with two nakida
Guide
1
If you are knitting on the needles, and instructions should make double nakida, this means that the tip of the right spokes you should throw twice the working thread or otherwords, double-wrap the thread of the right needle.In addition to a number of subsequent loops and to form a particular pattern, then the next row is likely to have to turn down the extra two loops in a certain way, thus clearly follow the pattern of knitting.
2
If you crochet, the column with two nakida done as follows.Throw the hook working thread twice, enter the hook into the loop of the previous row, grab a working thread and pull.As a result, the hook must be: just elongated loop, two nakida, another loop (the farthest from the working yarn).Then grab hook working thread and pull it through the loop and the first nakida, are on the hook.Then again capture the working thread and drag it through the loop and the second nakida.Once again throwing the thread, pull it through the two loops left on the hook.
3
number of columns with two nakida is considerably higher than the usual number of columns, so knit fabric thus easier and faster.However, when such a knitting fabric obtained is sufficient openwork and a loose, you need to consider if you are inventing your product design.
4
When knitting a series consisting of columns with two nakida , begin a series with a chain of four air loops (so-called air loops rise), which on the canvas appear as the first (or last)column in the row.
5
When knitting bars with three or more nakida the principle of action is retained, only increases the number of receptions.Column two nakida vyvyazyvayut in three stages (two loop) column with three nakida - Four doses (two loop) and so on.
Sources:
  • Club needlework
Sources:
  • how to connect the columns with nakida