- balloon string of strong, PVA glue, acrylic paint sprayer, willow branches (flexible), 4 branches and 15 cm - for the frame, 3 branches, 50 cm - for weaving.
Find a place to work.Decide which option you wish and prepare the necessary materials.It is best to start with the lightest netting, the next step will be easier to learn by taking this.
Take all air balloon uk, brush with white glue and normal thread wound in different directions.Wrap up until the "empty" space is empty, then leave to dry for a day.Ready dry "cocoon" pierce the needle, pull out the remains ball well.At the request can paint ready ball acrylic paints.
Willow Weaving requires patience and care.Willow branches before work needs to be cleaned and leave for an hour in warm water.From this, they become more flexible.First you need to select the 4 branches of 15 cm. Connect the ends of the thread - will 4 laps.Then insert them into each other, bonded together with thread.Thus, you should get a form ball well.Take the long branch and start gently twisting the ball so that it ends the "hiding" inside ball but it appears on the surface.It is necessary to weave until ball not become dense and large "hole" will not turn into little.If ball was not sufficiently filled, repeat the weave.The ends of the branches, try to hide in the ball well.Two days later ball dry up and it can be painted.
Tip 2: How to weave the ball
ball can be woven out of the ordinary hemp rope or thread.Depending on the size of the ball can be a little decoration, which will find its place on the shelf, or by making a large ball, adjust it with the original shade.
- - inflatable rubber ball
- - Vaseline
- - hank hemp rope
- - PVA glue
- - brush
- - needle
- - acrylics
- -seashells, beads, beads
Think how big the product you are going to weave.Buy a simple children's balloons, they are small and large.Inflate the balloon required size and tie tightly to keep out air.
Prepare the table.Spread it on old newspapers, or p / e film.Squeeze the tube of petroleum jelly on your fingers.Spread evenly the entire surface of the ball.It is necessary to thread or hemp is not stuck to the tires.
Wind hemp rope on the ball.Do this like a skein of thread is wound.Lay the rope on the ball at random, a few turns horizontally, then vertically several turns.Rope layers are not located close to each other, a balloon shines through the remaining gaps.Distribute evenly hemp momentum throughout the volume of the ball.
Promazhte PVA glue bead rope.Brush liberally apply glue to your hemp soaked it all.Make a few more revolutions of balloons, again soak hemp glue.When you see that we have achieved the desired result, your ball has turned out, leave it to dry completely.
Pierce needle balloon is placed inside your woven ball.Through the gaps between hemp remove rubber pieces out.Do it carefully, do not squeeze the rope.
hemp rope itself is a beautiful textured material, but if you need to give it some color, then take acrylic paint and a brush, paint the wicker sharik.Posle drying glue on the surface of the ball beads, shells or beads
If you weaves a ball of thin thread, use PVA glue in a plastic tube.Thread the thread a needle and pierce through the tube.Now you'll be pulling the thread already prepared adhesive.
follow closely the work - willow branches can bendif excessive force, so do not use thick branches thin.Be careful with their thickness.
At the request of the branches of a willow can make balls of different sizes.To do this, 4 main branches should be longer.Paint can only dry balls.
- weaving willow branches