you need
  • - a piece of cardboard pale pink;
  • - nine white beads;
  • - laced braid bright pink;
  • - a small piece of felt (red or magenta);
  • - white satin ribbon width of 0.5 cm;
  • - adhesive;
  • - colored pencils;
  • - scissors;
  • - pink colored paper.
Guide
1
Take a piece of cardboard soft pink color and draw on it a rectangle with sides of 20 and 10 centimeters.Vystrigite figure.The resulting preform bend in half and carefully iron the fold.From lace ribbon of bright pink otstrigite two pieces of 10 cm and carefully glue to the outside of the card at the top and bottom of the product, stepping back from the edge of about one centimeter.The width of the ribbon lace - 0.5 centimeters.
2
on colored paper pink draw a shape in the form of heart a
nd cut it (you can use scissors with scalloped edges).It should be noted that the figure should be the size slightly smaller than the card.Measure the length of the figures in the form of hearts in diagonal and exactly the same length, cut a piece of white satin ribbon.Samu ribbon stick to the right side of the heart, then the very heart of the glue on the outside of the card exactly in the middle.
3
of red felt, cut three circles with a diameter of four or five centimeters, then gently each rastrigite in a spiral, as shown in the picture.
4
Twist of the resulting "ribbons" roses and that they do not fall apart fix them with glue.
5
Stick roses on white tape currently on the card, at the same distance from each other.In the middle of a glue bead roses each.The remaining beads of glue on the outer side of the card at the top and bottom.Postcard is ready, now it is necessary to write only on the inner side of its recognition or desire and can give a loved one.