Guide
1
The screen itself is a simple mechanism.First the TV frame - rectangular frame.Party it should reach an average of 1.5-2 meters in length.The upper part of the screen can be made from a conventional rack or piece of wood.The bottom - of a heavier stick (you can also use the rail).
top and bottom of the screen components to ensure reliable fixation in stagnant water, and a small stream.
2
on the finished frame is secured network fabric using strong thread.The thread must be secured at the beginning of the stick (rail) and begin to throw a cell on a thread and tied to a stick.
It is worth to remember that the smaller the thickness of the thread netting, the more fish you can catch.More catchability network of fishing line, but they are not as durable.Netting made of p
laited or twisted rope
Each cell cloth tied up to the edge in a spiral.The thread is passed from top to bottom without missing a single cell, stretching, thus, in a straight line.The network will work more effective, the lower the tension netting.Also, the length of the yarn between the top and bottom will be directly dependent on the height of the fishing screen.
3
a centimeter from the edge strips from both sides need to do loop knots to secure the ends of the screen and the netting strands.
4
to the bottom of the assembled fabric is attached load.The upper part of the fishing line is usually secured to the float.It will be located on the surface of the water and indicate that caught the fish.You can install a hard float as the dried and painted with waterproof paint sticks.
5
Fishing screen installed in two ways: falls on the line or a rope thrown from a boat or from the shore.At one end of the screen tied a long rope, with which design can be easily pulled to shore.
If several screens of fishing, be sure to mark in any way place where they are located, so that later they were easy to find.