Tip 1: How to learn to tailor clothes

to sew any favorite thing without problems, be sure to be able to cut.Many do not want to take up sewing, because they are afraid of the seemingly complicated process of cutting.However, to learn how to cut - it's easy enough.
you need
  • measurements;
  • needles;
  • scissors;
  • paper;
  • pencil;
  • chalk
Guide
1
first step to being able to cut a step should be the construction of patterns.To do this, we must be able to take basic measurements and know how to apply them as to the type of clothing that you want to create.The basic pattern is made on paper.That it is necessary to identify where the darts should be, and move the actual size.And then start to work with cloth.
How to learn to cut
2
Before you start cutting fabric sanforize experts recommend.That is pre-treated with a damp-heat method.It is necessary for the fabric to give more shrinkage during cut rather than in the final product.It must be done so.If the finished product is to be erased, then the need to pre-wash the fabric at the same tempera
ture and in the same mode in which this will occur later.Dried tissue need to iron.
3
now proceed to the cutting of the desired items.As a rule, usually tailor fabric folded in half along the inside out.The edge of this should rest on the edge.Especially this method is good when you need to get a symmetrical parts.
How to learn to cut
4
On the prepared tissue Lay your paper pattern, pin it with pins.Petit swipe line, which will be cut.Do not forget to leave room for allowances - about 1.5 cm (for fine fabrics can be smaller for thicker - more).
5
Do not forget about the tools that will be held cutting work.We are looking for that well-honed tailor scissors, so as not crushed, not torn or deformed tissue.Cutting?Now you can start sewing.
How to learn to cut

Tip 2: How to learn to cut

independently sew things become very important today.Before you learn how to correctly and beautifully to sew, you need to learn how to cut.To master the correct product is easy to cut, it is necessary to perform certain mandatory rules.

How to learn to cut
Guide
1
fabric before cutting, it is desirable to lay down gently on the common threads and ironed.Fabrics, cotton, iron on the reverse side very hot iron and steam.Stretch fabrics need to iron slightly hot iron without steam.Silk fabrics ironed very carefully poorly heated iron without steam.Iron all fabrics only common thread.
2
prepared for cutting tissue is decomposed into a wide flat surface.The cloth should be folded in half, right side facing in.For cutting of tissue can be successfully used a large table.
3
Patterns for future products better cut of thick polyethylene film.Every detail of the pattern to be signed with a ballpoint pen.Write the name of the parts (back, sleeves, etc.), to designate all the lines: lobar, fold marks for crosslinking with other items.
4
lays out pattern pieces should be labeled on the fabric down.It is important to lay out the pattern on the fabric in the one direction.Especially if the fabric with a nap.The pile should be directed downward.That is, if you hold your hand on the pile, he should not go up.
5
details expanded in order, clearly respecting the common thread, sewing pins to pin the fabric, cut around every detail of fine tailoring.Mel White is better to take.Bypassed light strokes.
6
details full circle pattern, given darts and other shaped line.In longitudinal sections added 1.5 centimeters at the seams.At the bottom of the product and the bottom of the sleeves add 4 centimeters.Again circle on new labels every detail.
7
find details of tissue products very carefully with tailoring with sharp scissors.
Sources:
  • learn to sew and tailor yourself
Note
to learn how to sew and cut, you need to first learn the basics of sewing, that is, to know the theory -which are hand and machine stitches the seams What are the ways of processing fabric, variety of fabrics and features to work with them.Theoretical knowledge about sewing can be obtained from specialized books of thematic Internet sites or in special courses on cutting and sewing.
Helpful Hint
learned to sew from scratch can be patient person, neat, attentive to detail and have a well-developed fine motor skills of hands.Understand how to learn to sew and cut the power of every woman would desire.To have an idea of ​​the building complex, simulated things should first learn about the history of fashion and style, to understand how to create products from simple to complex.
Sources:
  • learn to sew and tailor