Guide
1
best to handle edge tissue overlock.Use for this purpose a narrow hem three-chain or blanket stitch.If you do not have this function on your sewing machine, you can do without it.For example, you can edge tissue double-bend half a centimeter and carefully press them podvorot.If the fabric does not allow the right edge of the tuck so you can wrap up first once, stitch, and then repeat the procedure.
2
Another way of edgings - rapping piping.To do this, take a strip width of about three centimeters.Its length should be a few centimeters larger than the processed edge tissue .First you need to cut the excess tissue closer to the line.Then it is necessary to stitch along the fold line short stitches.If the fabric is stretched, its iron the iron.
Then bend the fabric on the wrong side so as to cover raw slice is under hem put an edge gasket.Then put a line at the same distance from the edge.
3
When processing whimsical knitted fabric also has its complexity.Knitwear can be treated in the same piping, it can be a simple podgibkoy.To do this, lay a line and a half inches from the edge of the fabric .Keep the line should be conducted from the edge to the center.It is necessary to ensure that the thread is not astringent, not curved her.Then tuck the edge and treat it with overlock.
4
Knitwear can be treated also Rulik.To do this, stitch along the fabric on which is stitching.Oversize tuck and treat overlock.Prepared striped fabric (its width two to three centimeters) fold in half lengthwise.A little stretching, sew her face to the front of the product.Then defer on the front side, removing the binding.
5
Sometimes the model does not include the processing thread.Especially on such light translucent fabrics like organza and taffeta.In this case, you can try to singe the edges lighter or candle.
6
You can also use a colorless nail polish.He will not give crumble tissue , consolidate territory, and thus will not be visible even on white silk.