you need
  • - canvas;
  • - printer;
  • - waxed paper;
  • - copy paper;
  • - tracing;
  • - iron;
  • - pen or pencil.
Guide
1
Before starting work, think about whether you need to carry drawing .If it is simple and without subtle color transitions, try to embroider his scheme.Divide into equal squares pattern in height and width.It is desirable that the beginning of each color coincide with the line.Carry drawing only if you count the stitches on the scheme for some reason fails.
2
Transfer the pattern on the canvas several ways.They are not very different from those that
you transfer it to the fabric.However, the method of spraying or flashing circuit pattern in this case is to use meaningless.Canvas has a fairly loose structure, therefore, graphite or chalk powder simple vysyplyutsya through the holes, and seam curves give contours.So it is better to use carbon paper or print drawing directly on the canvas .
3
To convert a carbon first transfer pattern on tracing paper.Cut a piece of canvas size.Put on a carbon paper ink side to the canvas, and on top - with a pattern tracing.The pattern should be in the position in which it is to embroidery.Cleave the entire structure with pins or staples to layers are not leaving.Circle all full line drawing or just the basic.Small details that do not cross embroidered can not be applied.
4
To print, you will need wax paper.It can be purchased in stores that sell office supplies.Cut a piece of canvas A4 size.Determine where it Wrong and the front side.Cut a sheet of waxed paper of the same size.Attach it to the canvas and align the slices.The glossy side of the paper to be in contact with the underside of the canvas.Progladte all warm iron.Stroking should be as long as the canvas is saturated with wax.Trim the edges, but layers do not separate.Lay received a "list" in the printer without removing it from sheets of plain paper.The image must be printed on canvas.Print drawing and dry it.After drying, the split canvas and paper.