- - woolen or mixed fabric;
- - tailor's chalk;
- - pins;
- - thread to match the fabric;
- - interlining;
- - fastener;
- - flat buttons;
- - sewing accessories;
- - iron and gauze.
For sewing skirt pleated suit dense monochromatic fabric or material into the cell.It can be wool or blended fabrics.They hold folds best.Also, you can sew a skirt and cotton fabric and linen.
Pattern circular skirts with pleats or counter can be built directly on the fabric.To do this, measure the circumference of the hips and the length of the skirt.Multiply bushel thigh girth at 3, so get the necessary cutting width.For example, the possessor of 100 cm hips need to sew skirts pleated fabric width of 300 cm. As usual yardage 1.5 m, you will need to purchase otrez length equal to the measure of the length of skirts, multiplied by 2 plus 15 cm on the belt, seam allowances andhem.
cloth lay on a smooth, level surface.Put yardstick along the edge of the length of the product and the side skirts bushel width divided by 2. Mark the location of the folds.For this raschertite cloth strip of width equal to the desired value of the folds, such as 4 cm.
Sew side seams skirts and Stitch zipper.Now start to lay the folds combining the planned line.This slaughter in their tailor's pins at the top and bottom sections of the skirt.Try to keep the side seams were closed fold.
carefully proutyuzhte item via a wet gauze.To fold masters do not disperse soapy water, apply it to the wrong side of the fabric at the location of creases.For fastening means dissolve the soap in warm water and add a teaspoon of soap and water solution of vinegar.Wet gauze in solution and iron over it with the underlying tissue folds inside out.Repeat several times to get a clearer line.
Sew belt.Carve it out of fabric remnants, duplicate adhesive interlining.Then add the item to the cross and Stitch upper edge of the skirt.On the right side of the belt loop to process the fasteners, and the left-sew flat buttons.
Remove dressmaker pins, fixing wrinkles.The bottom of the skirt bend on the wrong side of the first 5 mm, and then at 1 cm and Stitch close to the fold.
Folds laid once and baste them manually throughout.Again proutyuzhte them through a wet gauze and remove the basting.
When working with the material in the cell is important to coincide with the line drawing SEWING side seams.