you need
  • - album sheet;
  • - pencil;
  • - eraser.
Guide
1
Make the broad outline of a gun.First, in the middle of the sheet, draw a long, narrow oval, located diagonally left edge upwards.This will be the muzzle of the gun.Underneath spaced draw a straight line parallel to the oval.
2
Connect line with the muzzle smooth lines located at both ends of the line.So picture a flitches - stand under the gun.Attach visible wheel - draw a circle so that the lower limit of the mast would cut them almost in half.
3
Draw details of the cannon.The upper end of a little narrow down and extend a little bit lower.The widest part of the picture the face - draw a circle, half of which is at the boundary of the oval.Now attach the handle guns.
4
Draw rings, which are located in several places the muzzle of the w
eapon.Draw curved lines, its bulges facing the upper end of the barrel and protruding beyond the boundaries of the oval.Draw a place for the wick.Indicate his small circle, placed at the top of the barrel.
5
Draw details of the mast.Upper and lateral limits of the visible wall Draw a double line, symbolizing the thickness of the board.At the top of the draw two bolts - small ovals, separated by curved lines for volume.Doris continued attachment.
6
Draw the bottom of the mast: to the edge portion of the side wall finish a line located almost at right angles to it.Again, picture the thickness of the board, having a second line parallel to the first.Walk through all the visible parts of the mast short strokes to make the type of tree structure.
7
Draw details of the wheel.Draw ovals arranged diagonally in the same direction as the inclination gun.Divide by convex lines separating visible from the upper side portion, which is indicative of the thickness of the wheel.In the middle of the wheel mounting draw.
8
Doris gun parts.Draw chocks under the wheels, depicting them first cube.Also draw a nucleus gun - small circles with a diameter shall not exceed the amount of the fine part of the muzzle.