- - details of the collar;
- - product;
- - thread to match the fabric and contrast color for basting;
- - needle;
- - sewing machine;
- - iron.
To Stitch collar shirting (a jacket) type with a cut-off counter in the neck, first upper and lower parts add together the right sides.Trim the edges of the slices and sour departure and all, that is, short cuts and the outside of the collar, leaving the inner nezashitoy.
Seam trim, excess fabric at the corners cut off.Remove the collar, all seams carefully straighten, clean sweeps and proutyuzhte.At this stage, you can lay a decorative line along its edges.Mark the center of the collar thread a few stitches in contrasting color.
Details racks and fold right sides.Mark the middle.The collar is inserted between the rack so that coincided label on the collar and middle rack, and the lower section of the collar - with the top cut counter.Cleave all the pins and Stitch sections rack while vtachivaya and collar.Trim the seam allowance.In places rounding parts make small incisions.
remove the rack on the front side.Sutures are correct and priutyuzhte.Attach one side of the rack to the neckline, right sides together, Stitch on the sewing machine.Allowance cut off, and then iron the side of the rack.
slice the inside of the turn in detail once and fold scribbled exactly seam stitch.Proutyuzhte item carefully.All baster clean.Rack defer all the slices at a distance of 1-2 mm from the edge.
upper and lower parts collar fold right sides together.Trim edges and sour slices departure and all, that is, short cuts and the outside of the collar, leaving the inner nezashitoy.Seam trim, excess fabric at the corners cut off.Remove the collar, all seams carefully straighten, clean sweeps and proutyuzhte.
Align the middle of the collar and the back and one side of baste, Stitch on the sewing machine, with its line near namitka.Slice the top of the collar and bend scribbled fold in seam pritachivaniya.Now you can lay the finishing line at the edges of the collar.
also possible turndown Stitch the neck and with the help of piping.To do this, prepare details of a collar as described above.Attach both sides to the neckline, then put on the collar piping face and align all 4 cut.Sew together, piping bend on the wrong side of the product, priutyuzhte.
Fold 1 times cut and stitched.To the neck looked as gently as possible, the piping can not sew, and to treat it in the cut and sew overlock in several places blind stitches.