- - Knitting;
- - spokes thickness of thread.
to dial any number of sample loops.The cloth is knitted only rarely purl crossed loops of this kind are usually used in combination with others.If you need a version of garter stitch made crossed loops, knit its front.are performed so.Remove an edge.Enter the right needle into the loop, which is currently on the edge, right to left.Working thread should always be at work.Grab it right needle, pull it out on the front side.The loop of the previous row, reset, as with conventional vyvyazyvanii loops.
backstitches When you crossed the working thread should be all the time before work.From the usual crossed purl loop is characterized in that the right needle is injected into the loop from left to right.That is whythis kind of loop is called "Wrong for the back wall."This name may be encountered in some old magazines on knitting.Enter the right needle into the loop from left to right.Working thread is on the left spokes.Grab it and pull the loop on the front side.The loop of the previous row reset.
crossed the wrong can be connected in a different way.Remove an edge, place the working yarn in front of the left needle.Enter the right needle into the loop from right to left in the same way as you would with a conventional knitting backstitches loops.Working thread right move at the end of the spokes and pull to the right side, moving to the right needle.
Crossed loop knit no more difficult than usual.However, their implementation is spent a little more time, and accordingly - the process of knitting a little slowed down.Therefore, when performing a smooth knit cloth crossed only one type hinges.often make facial crossed, and purl - conventional.Figure tight turns, but performed no slower than usual hosiery knitting.
Tip 2: How to Knit wrong side
crocheted fabrics, made embroidery front (only facial loops) has a second - the wrong - side.It is simple purl loops (identified in the manual knitting a small black dot) or Wrong crossed (the big black dot with a check mark on the top).Practice on a small sample, to learn how to knit the wrong side of things quickly and accurately.This will be the basis for creating many samovyazanyh products.
- - straight spokes;
- - yarn.
Dial direct spokes of two or three dozen of loops to create a knitted pattern.First, tie the front row, then turn the work.The thread has to go to the knitting.
Remove the first, an edge, loop and enter the right needle in the subsequent textile shackle.It is necessary to make a move on.Grabbing the thread, pull a new loop from the inside work.Stay on the left spoke shackle reset.Thus, you get a simple Wrong loop.
try to contact the underside a crossed loop.When combined with her face crossed you can create a more dense and elastic fabric (it is especially recommended for knitting rubber bands, socks, gloves and other products).Threads position again to work - on the index finger and right spokes.
Enter the working needle (it must move from left to right!) In the textile shackle on the left side of the work.You will catch the thread and pull it out in the form of loops on the wrong side of knitting.The spent shackle loop on the left spokes reset.
done now backing a number to the end of a conventional or crossed purl loops.Try to do them the same size, then the painting will turn flat and smooth (not accidentally wrong side of the work is called "iron").Often loops inside out turn out weaker than loops "face" of the product.To avoid this, do purl little more tight than the face.
Continue stocking st sample of the web, that is, alternate right and wrong numbers.If on one side of the work you vyvyazyvayut crossed, crossed himself and then repeat on the other side of things.Never confuse a par simple and crossed loop, otherwise the knitting will look homemade.
product is fully associated face and reverse series, always a little folds on the top and bottom edge.To avoid this, make the edges of the work is more dense pattern (such as gum or garter) or tie finished thing hook.
When working with needles hosiery you will turn circular rows stocking st.In this case you should always be carried out only facial loop.
Crossing loops can be achieved in another way.Remove an edge loop knit purl second available on the left spoke loops.Once you pull the working thread on the front side, the second loop to the first inevitable wear that can be knit or purl the usual crossed.