- - unfinished knitted thing;
- - hook;
- - the spokes;
- - thread;
- - scissors;
- - iron.
To complete the knitted item, close the loop.This can be done in several ways.The first closed loop knitting, knitting which is performed with the part.Simply knit together the first and an edge loop using the front binding, for the rear wall of the hinge.At the same time the two loops should get one.Her perekin'te right back on needles and knit left behind together with the next loop of the front stitch.Repeat this algorithm to the end of the series.When the spoke will remain one loop, cut the thread at a distance of about 3-4 cm from the web, please enter it into the loopand tighten.When you close the loop in such a way watch out for those not contracted to the edge of the canvas.
Close the loop hook.It is completely identical to the first.The only difference is that the hinges face provyazyvayutsya viscous by the hook.
Close the loop using a needle and thread.The main difference of this method from the previous in that the closure takes place on the open loop.Auxiliary thread dovyazhite additional 3-4 range and good otparte detail.Now, the whole problem lies in the fact that very carefully to dissolve the subsidiary ranks .After that, take a needle with a large eye, it Thread the warp yarn left over from knitting, and holding the product face to himself, secure open loop.Close the loop, alternately inserts a needle into the loop 2 on the reverse and obverse.At the same time, take care not to deform the edge of the product.
finished knit items after washing dry on a flat surface to prevent them from stretching.
Good advice Keep the temperature of the iron while stripping knitted items, particularly if present in the composition of synthetic yarns.
- closing the loop of the last series