Tip 1: How to knit stripes

After each related stuff usually stays at least a small ball of yarn.Remains of piling up and waiting in the wings.Single-colored items are not related, but it is possible to think and relate something fun.For example, a jacket or socks strip or even scarf.You can link multi-colored product, which will be almost no knots.
you need
  • - remnants of yarn;
  • - spokes.
Guide
1
masters usually try to pick different colored thread so that they have the same thickness.If you have a lot of about the same yarn remnants, nothing will prevent you link the original new products from them.But you can do and the opposite way, that is to knit a striped of very thick thread, and the other - from the very thin.You get something like pleated fabric.The transition from one color to another is about the same.Knit stripes convenient on straight needles, but you can use a circular.
2
Dovyazhite before the start of the strip.At the beginning of the series, attach a new thread, but being careful not to b
reak off.The tip of a new line of pull on the top of the loop, located on the left spoke.The cloth strip in looks better if it is connected stocking or garter.You can knit and elastic band, but in any case the pattern should be fairly simple.When ribbed must immediately determine where you will have the front side.Start a new strip better with facial series.Knit him some facial.The next series of knit face and reverse, placing them above the corresponding loops previous series.
3
Tie strip desired width and finish it next to the backing.Previous thread color wrap once around the one you just finished knitting.Edge loop can be removing and provyazyvat.It depends on how you intend to fasten parts together.If you have a seam at a distance from the edge, remove the initial loop in the same way as when knitting monochrome canvases.If you are going to communicate the details to sew or crochet "loop in the loop," provyazyvayte an edge.It is necessary that the edges of the strips are the same.
4
bands on circular needles knit about the same.In this case, it is important to remember where you have the beginning of the series.Usually it is seen, the place of the product in terms of a little bit stretched and a bit thicker.But this is not always the case.Therefore, the beginning of a series of best mark.Knit yarn of the first color fragment of the desired width.On the reverse side, attach the second strand.In this case, it is better to make a double knot.The end of the new thread is also possible to build on the previous row, that it was inside the new hinges.First strand also does not break.Leave it for a while alone.Knit strip to the desired width, pull the first thread on the wrong side and tighten around the one from which you knit stripes , one turn.

Tip 2: How to knit band

striped outfits and accessories handmade look unpretentious, and at the same time elegant.They do not require laborious and long-term performance - Needlewoman enough to be careful and accurate.The ability to knit bands of different colors allows the hosts to use all remnants of yarn from other activities to create new and unique things.With horizontal or vertical lines on the clothes can disguise figure flaws and prepare the product for a person of any age and gender.
you need
  • - yarn of two or more colors;
  • - dress sketch of the future;
  • - tank coils;
  • - thimble for jacquard.
Guide
1
find the best combination of multi-colored yarn and think about the order of alternating bands on the product, to get a beautiful multi-colored knitting.All threads must be the same thickness!Begins Needlewoman recommended to tie the band of two series of alternating colors.Well, if a darker tone pattern will be combined with elements of decoration: inlay, cuffs, pockets and other rim.This will make things complete.
2
Try horizontal stripes .To do this, you need to dial the spokes of the required number of loops and tie a few rows of the same color.The thickness of the strips are individually selected.Yarn other colors start to enter into the work only with the personal number!
3
Place the balls of yarn of different colors in the special containers for Jacquard (colored patterned knit), so they are not messed up.Perform an edge loop of a new color and begin to knit the front row.Making the second lane, watch for the formation of filament broaches left to work: they do not have any free sag or delay the knitted fabric.
4
Learn basic knitting vertical stripes.In this embodiment, two or multi-color pattern and the colors of the new yarn is introduced always in the personal number.Tie first required number of loops face (depending on the thickness of the future strips) from one working thread.Then put on this thread yarn from a non-coil forming overlap.This trick will help to gently stretch the thread through the seamy side of things.
5
Knit the next lane, watching broach.The wider you make the pattern, the more likely it is recommended to fix purl thread excesses.So they will not pull the job.
Helpful Hint
If you manage to correctly tie the horizontal bars, with the "face" of the product must be a clear color shift from one to another.On the reverse side is to be sequentially alternated series of additional strips.

When knitting vertical stripes is convenient to use special thimble for jacquard.It will help to gently stretch the working thread, so that it can not be confused with non-working.This is especially important when a series vyvyazyvayut many colored stripes - because the more thread is used, the more difficult job.
Note
When the bands on the needles break off the thread only if you are firmly convinced that more this color will not knit.End of the thread laid on top for the left hinge spoke that he was inside the canvas.
Helpful Hint
When knitting crochet thread best bands dropped.Leave the "tail" length of 3-4 cm. Align it with the end of the new thread color and run for the posts both of the previous row.

Interesting delicate bands are obtained by knitting on a fork.Tie several bands "shells" or other openwork pattern and bind them together hook.