PATTERNS Based on shelves and back, cut and carve out a separate part of the combined piping and Stitch vertical seams of your product, leaving intact the shoulder seams.Piping back consists of two parts, a buckle sewn and piping forehand cut out whole piece.
at its narrowest width of the piping, taking into account the seam allowance should be 6-7 cm. Take the product pattern, and kill all the assembly and folds in the areas where you will attach the piping .Pin the pattern to a sheet of tracing paper, then circle the edge of the future piping chalk or photocopier roller.
Make sure that the width of allowances for turnery coincides with the width of allowances on basic details of your product.Cut out fleece with SEAM parts coinciding with the details of piping, piping and cursed back and forehand inside.
piping, taped interlining must keep good shape, do not deform and bend, and thus follow the shape of the neck and armholes products.Make sure the armholes and neck are symmetrical to each other.
Sew side sections and piping parts razutyuzhte them and then treat the lower edge of the piping zigzag or overlock.
Fold piping together with details of the back and before the faces of the product as it is together with pins and remove the ends of the piping on the front side in the place of fastening the zipper.Clip Available hem to the neck, and then lightning Pin allowances for top piping.
typed stitched piping to detail the product, starting line, departing 2 cm from the line of the shoulder seam.Nadsekite places fillets seam allowances.Piping, remove the wrap and allowances lightning on the wrong side. Sew the piping to the band zippers invisible line.
shoulder and back sections of the forehand and prostrochite razutyuzhte seams.Then pull out the shoulder seam allowances and Stitch shoulder seams on the piping.Razutyuzhte seams.Complete formation of the neck, sweep off from the inside edge of the neck and armholes.On the reverse side product then iron the neck and armholes, and then remove the basting stitch and piping a hidden seam to the allowance of the side seams.